Table of Contents
Advertisement
P05: KNEE
KNEE
DCC
KNEE POINT
KNEE SLOPE
KNEE MAX
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL
P06: DETAIL 1
DETAIL
DETAIL LEVEL
DETAIL FREQ.
CRISPENING
DTL H/V RATIO
LEVEL DEPEND
LVL DEPEND LVL
APERTURE
APERTURE LEVEL
P07: DETAIL 2
KNEE APERTURE
KNEE APT LEVEL
DETAIL LIMIT
DTL WHT LIMIT
DTL BLK LIMIT
DTL V-BLK LIMIT
V DTL CREATION
H/V CONTROL
MODE
P08: SKIN DTL
SKIN DETECT
SKIN SAT
SKIN HUE
SKIN WIDTH
SKIN DETAIL
SKIN DETAIL LVL
[ON]
/OFF
[ON]
/OFF
[85.0]
50.0 to
to 109.0 (0.1
steps)
[0]
(–99 to
to +99)
[OFF]
ON/
[0]
(–99 to
to +99)
[ON]
/OFF
[109.0]
100.0 to
to 109.5
(0.1 steps)
[ON]
/OFF
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[ON]
/OFF
[0]
(–99 to
to +99)
[ON]
/OFF
[0]
(–99 to
to +99)
[OFF]
ON/
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[R+G]
NAM/G/
/Y
[H/V]
V,
EXEC
[0]
(–99 to
to +99)
[0]
to 359
[40]
0 to
to 90
[OFF]
ON/
[0]
(–99 to
to +99)
To turn knee correction on/off
To turn the DCC function for high-luminance
subjects on an off
To set the knee point level (in %)
To set the knee slope level
To turn the knee max function on/off
To set the knee saturation level
To turn the white clipping function on/off
To adjust the white clipping level (in %)
To turn the detail correction (contour
correction) function on/off
To adjust the general detail correction level
To adjust the H detail frequency (thickness of
contour lines)
To adjust the crispening level at which noise
signals are to be removed in detail correction
To adjust the ratio of vertical detail to
horizontal detail in detail correction
To turn the "level depend" function to
decrease the black level in detail correction
on/off
To adjust the level of the "level depend"
function
To turn the aperture correction on/off
To adjust the aperture level
To turn the knee aperture function on/off
To adjust the knee aperture level
To adjust the both detail black and white
limiters
To adjust the detail white limiter
To adjust the detail black limiter
To adjust the V detail black limiter
To select the source signal for V detail
To select the operation mode of DTL H/V
RATIO on the DETAIL 1 page
V: To change only vertically
H/V: To change both horizontally and
vertically
To call the COLOR DETECT screen to detect
the color for which the color detail function is
to operate:
To detect the color
Shoot so that the desired color enters in [
displayed at the center of the COLOR
DETECT screen, then press the ENTER
button. Adjust SKIN SAT and SKIN HUE as
required.
To adjust the saturation level of the hue
processed by the color detail function
To adjust the center phase of the hue
processed by the color detail function
To adjust the width of the hue processed by
the color detail function
To turn the color detail function on/off
To set the level of the color detail signal
S R A
S R
S R A
S
A
R
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S R A
S
A
S R A
S R A
]
S R A
S R A
S R A
S R A
S R A
33
Menu Operations
- Quick Links:
- Ac Adaptor (Supplied)
Hide quick links:
Advertisement
Table of Contents
