Sony HDC-X300 Operation Manual page 36

M05: AUTO IRIS IRIS WINDOW
IRIS LEVEL
IRIS APL RATIO
IRIS SPEED
CLIP HIGH LIGHT
M06: WHT FILTER INH
FUNCTION 3
COLOR BAR SEL
GAIN LOW
GAIN MID
GAIN HIGH
WHITE SWITCH <B> MEM/
SHOCKLESS
WHITE
ATW SPEED
232C CamCnt RATE
ZOOM SELECT
36
Menu Operations
[1]
/2/3/4/5/6
[0]
(–99 to to +99)
[0]
(–99 to to +99)
[0]
(–99 to to +99)
[OFF]
ON/
[ON]
/OFF
[MULTI]
/100%/75%
[0]
–3/ /3/6/9/12/18/24/30/
36/42/48
[9]
–3/0/3/6/ /12/18/24/30/
36/42/48
[18]
–3/0/3/6/9/12/ /24/30/
36/42/48
[ATW]
[1]
OFF/ /2/3
[4]
1/2/3/ /5
[19200]
4800/9600/ /38400
[1]
/2
To select the auto iris detection windows:
1 2 3
4 5 6
The shaded portion indicates the area where
light detection is to occur.
To adjust the auto iris target value
To adjust the Mix ratio of auto iris detection
peak value and average value
To adjust the auto iris speed
To turn on/off the function that, during auto iris
adjustment, ignores very bright areas by
dulling the reaction to high luminescence
To turn on/off the function that inhibits
independent white memory for each filter
position
To select the color bar type
To select the value (dB) when the gain setting
at the connected camera control is set to LOW
To select the value (dB) when the gain setting
at the connected camera control is set to MID
To select the value (dB) when the gain setting
at the connected camera control is set to
HIGH
To select the adjustment method for white
balance when WHITE BAL is set to B on
FUNCTION 1 page of OPERATION menu:
MEM: To use the value stored in memory
cell B using the PAINT menu as the
reference
ATW: To use Auto Tracing White balance
(function that automatically traces the
white balance or changes in lighting
condition)
To select the speed for switching the white
balance
To set the convergence speed for Auto Tracing
White balance
To select the transmission rate (bps) when the
unit is to be controlled with "RS-232C camera
control protocol."
For details on "RS-232C camera control
protocol," ask your Sony representative.
To set the zooming direction of the lens when
operating it from the connected camera
controller (With a certain lens, the zooming
direction may be reversed when operated
from a camera controller. In such a case,
change the setting of this item.)
S R A
S R A
S R A
S R A
A
A
A
A
A
A
A
A