Setting The Second Camera Input - Pioneer AVIC-8100NEX Operation Manual

Chapter
32 System settings
! The image quality may deteriorate depending
on the usage environment, such as at night or
in dark surroundings.
1 Park your vehicle in a safe place and
apply the parking brake.
2 Using packing tape or similar, place
markings approximately 25 cm (9-7/8 in.)
from each side of the vehicle, and approxi-
mately 50 cm (1 ft. 8 in.) and 2 m (6 ft. 7 in.)
from the rear bumper.
2 m (6 ft. 7 in.)
Markings
Markings
3 Press the HOME button to display the
Top menu screen.
4 Touch the following keys in the follow-
ing order.
The "System" screen appears.
5 Touch [Camera settings].
The following screen appears.
6 Touch [Parking Assist Guide Adjust].
The following screen appears.
184
En
50 cm (1 ft. 8 in.)
25 cm
(9-7/8 in.)
25 cm
(9-7/8 in.)
Rear bumper
7 Set the guidelines by dragging the four
points.
8 Touch the following keys to adjust the
position of the point if necessary.
Moves the point to the left.
Moves the point to the right.
Moves the point upward.
Moves the point downward.
Extends the line to the left and right
from the current center point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Shortens the line from the left and right
to the current center point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Resets the settings of the distance and
Default vehicle width guidelines and adjust-
ment points to the default.
p When a point is moved, the distance from
the initial value is displayed at the bottom
of the screen.
Setting the second camera
input
You can view images of the second camera (a
front camera etc.) on the screen of this pro-
duct.