Editing The Stored Alert Points - Pioneer AVIC-8100NEX Operation Manual

Chapter
07 Registering and editing locations and routes
= For details, refer to "Warnings" settings on
page 66.
1 Press the MAP button.
The Map screen appears.
2 Scroll the map and select a location.
The cursor appears at the selected point.
3 Touch the following key.
# To edit a previously saved alert point, touch
.
4 Touch [Add Alert Points].
The "Add New Alert Point" screen appears.
5 Set the necessary parameters.
! Alert Type:
Sets the type of the alert point.
! Speed Limit:
Sets the speed limit for this alert point (if
applicable).
! Direction:
Sets the direction from which you expect
the alert to come from.
6 Touch [Save].
The location is saved as a new alert point.
= For details, refer to "Warnings" settings on
page 66.
p The warning for road safety cameras (like
speed cameras) is disabled when you are in
certain countries where warnings for road
safety cameras are prohibited. However,
you are fully responsible for ensuring that
54
En
Displays the shortcuts.
this feature is legal in the country where
you intend to use it.

Editing the stored alert points

Stored alert points can be edited later.
1 Press the MAP button.
The Map screen appears.
2 Scroll the map to the stored alert point.
3 Touch the following key.
Displays the shortcuts.
4 Touch [Edit Alert Points].
5 Set the necessary parameters.
# If you touch and then touch [Delete], the
selected alert point will be deleted.
6 Touch [Edit].
The alert settings are modified.