Pioneer AVIC-8100NEX Operation Manual page 205

Audio adjustments
1 Stop the vehicle in a quiet place, close
all the doors, windows and sun roof, and
then turn the engine off.
If the engine is left running, engine noise may
prevent correct Auto EQ.
p If driving restrictions are detected during
measurement, measurement is canceled.
2 Fix the microphone for acoustical mea-
surement (sold separately) in the center of
the headrest of the driver's seat, facing for-
ward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.
3 Disconnect the iPhone or smartphone
device.
4 Turn on the ignition switch (ACC ON).
If the vehicle's air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
Switch the AV source to "OFF".
5
= For details of the operations, refer to Dis-
playing the AV operation screen on page 24.
6 Press the HOME button to display the
Top menu screen.
7 Touch the following keys in the follow-
ing order.
The "Audio" screen appears.
8 Touch [A-EQ&TA Measurement].
The "A-EQ&TA Measurement" screen ap-
pears.
9 Connect the microphone for acoustical
measurement (sold separately) with this
product.
8100NEX 7100NEX
Plug the microphone into the microphone
input jack on this product.
6100NEX 5100NEX
Connect the microphone with the mini-jack ex-
tension cable, and then plug it into the auxili-
ary input jack on this product.
= For details of the operations, refer to the In-
stallation Manual.
1
1 Mini-jack extension cable
2 Microphone for acoustical measurement
(sold separately)
Chapter
33
2
205
En