Connecting And Disconnecting An Ipod; Plugging And Unplugging A Usb; Storage Device; Startup And Termination - Pioneer AVIC-8100NEX Operation Manual

Basic operation
Connecting and disconnecting
an iPod
Connecting your iPod
= For details of the connections, refer to the
Installation Manual.
Disconnecting your iPod
% Pull out the cables after confirming
that no data is being accessed.

Plugging and unplugging a USB

storage device

p This product may not achieve optimum per-
formance with some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
Plugging in a USB storage device
% Plug a USB storage device into the USB
cable.
1
1 USB cable
2 USB storage device
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.

Startup and termination

1
After a short pause, the splash screen comes
on for a few seconds.
2
nate the system.
This product is also turned off.

On first-time startup

When you use this product for the first time,
select the language that you want to use.
1
After a short pause, the splash screen comes
on for a few seconds.
The "Select Program Language" screen ap-
pears.
2
use on screen.
3
4
5
2
# If you touch
vious screen.
Start the engine to boot up the system.
Turn off the vehicle engine to termi-
Start the engine to boot up the system.
Touch the language that you want to
Touch the following key.
Displays the "Smartphone Setup"
screen.
Touch the item you want to set.
= For details, refer to Information on the con-
nections and functions for each device on
page 90.
Touch the following key.
Displays the Top menu screen.
, the display returns to the pre-
Chapter
02
19
En