Checking The Chain For Dirt; Cleaning The Chain - Husqvarna 125 TC EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.37

Checking the chain for dirt

11.38

Cleaning the chain

Warning
Danger of accidents Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
Main work
–
Position the fuel tank and fit the two spoilers to the sides of the radiator bracket.
–
Make sure that no cables are trapped or damaged.
L01671-10
–
Mount the fuel tank vent hose.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
L01919-11
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Connect the fuel hose.
B01890-11
Finishing work
–
Mount the seat. (
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
1
with the rubber bushing.
M6
2
with the collar bushings.
M6
p. 42)
p. 47)
47
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)