Cooling System; Radiator Cover; Installing The Radiator Cover - Husqvarna 125 TC EU Owner's Manual

14

COOLING SYSTEM

14.1 Cooling system
14.2

Radiator cover

14.3

Installing the radiator cover

(125 TC EU)
Water pump
The pressure resulting from the warming of the cooling system is regulated by a valve
in radiator cap
temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the
cooling effect.
L01924-10
(250 TC EU)
Water pump
The pressure resulting from the warming of the cooling system is regulated by a valve
in radiator cap
temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the
cooling effect.
L01810-10
The radiator cover is mounted in front of the left radiator between the radiator shield and
radiator.
The radiator cover keeps the coolant temperature in the correct range.
Coolant temperature
L01811-10
The radiator cover is installed in front of the left radiator, depending on the ambient tem-
perature.
Radiator cover
notch
Radiator cover
notch
Without radiator cover
401055-10
Info
Do not use both radiator covers at the same time.
–
Detach radiator shield
L01811-11
1
in the engine circulates the coolant.
2
. This ensures that operating the vehicle at the specified coolant
1 in the engine circulates the coolant.
2
. This ensures that operating the vehicle at the specified coolant
65... 70 °C (149... 158 °F)
1 < 7 °C (< 45 °F)
without
7... 16 °C (45... 61 °F)
2
with
> 16 °C (> 61 °F)
1
at mounting points
2
and remove it.
70