Service Work On The Engine; Checking The Gear Oil Level; Changing The Gear Oil - Husqvarna 125 TC EU Owner's Manual

16

SERVICE WORK ON THE ENGINE

16.1

Checking the gear oil level

Info
The gear oil level must be checked while the engine is cold.
16.2

Changing the gear oil

Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
(125 TC EU)
–
Remove screw
–
Check the gear oil level.
A small quantity of gear oil should flow out of the opening.
» If gear oil does not flow out:
–
–
Mount and tighten the screw in the opening used to check the gear oil level.
L01711-10
Guideline
Screw, gear oil level check
(250 TC EU)
–
Remove screw
–
Check the gear oil level.
A small quantity of gear oil should flow out of the opening.
» If gear oil does not flow out:
–
–
Mount and tighten the screw in the opening used to check the gear oil level.
Guideline
L01815-12
Screw, gear oil level check
x
–
Drain the gear oil.
400721-01
–
Refill with gear oil.
400722-01
1 from the opening used to check the gear oil level.
Add gear oil. ( p. 83)
x
1
from the opening used to check the gear oil level.
Add gear oil. ( p. 83)
x
( p. 82)
x
( p. 82)
x
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
81