Table of Contents
Advertisement
What to do if ...
Relief in Case of Malfunctions
Warning! Only specialists are allowed to carry out repairs at the appliance. Improper repairs may
result in considerable dangers for the user. In case of a repair please contact your specialized
dealer or the after-sales service.
What to do if ...
... the cooking zones do not function?
Check whether
-
the fuse in the indoor installation (fuse box) is intact. Should the fuses trigger off several
times, please call an authorized electrician.
-
the appliance is switched on correctly,
-
the indicators in the control panel light,
-
the corresponding cooking zone is switched on,
-
the cooking zones are set to the desired cooking-on level (see chapter "Cooking"),
-
the safety cutoff of the cooking zones has triggered (see chapter "Safety Functions").
... the cooking zones cannot be switched off?
Check whether
-
the control panel is locked (see chapter "Childproof Lock"),
-
a period of more than 10 seconds have passed between pushing the on/off key and switching
on the desired cooking zone (see chapter "Switching on the appliance"),
-
the sensor controls are partly covered by a wet cloth or a liquid.
... the display except
Check whether
-
the on/off key was actuated unintentionally,
-
the sensor controls are partly covered by a wet cloth or similar things,
-
the safety cutoff was activated.
... after switching off the cooking zones no
Check whether
-
the cooking zone was in operation only shortly and therefore is not yet hot enough. If the
cooking zone is hot, please call the AEG after-sales service.
... a cooking section cannot be switched on?
Check whether
-
the childproof lock is switched on (symbol ).
TSE-N 01.00 A. B.
for residual heat suddenly fails?
or
for residual heat will appear in the display?
- 16 -
599 50 74 38 EN
Advertisement
Table of Contents
