Table of Contents
Advertisement
How to clear a recording paper jam
In the event of a paper jam in the receiving paper tray, the PAPER JAM XX" message is displayed. The two
numbers indicate the location of the paper jam in the fax machine.
Code
Jam position
10
Paper cassette. In the case of additional cassettes: Top cassette
20
Optional paper cassette: Middle cassette
30
Optional paper cassette: Bottom cassette
50
Single-sheet feed
80
Area of the paper feed (directly downstream of the tray)
90
Area of the paper exit (directly upstream of the paper exit)
Leave the fax machine switched
on. Open the side paper feed and, if
applicable, pull the page out.
Subsequently open the machine
cover by operating the release
lever.
Remove the printer unit from the
exposed machine.
If paper is located beneath the
metal transport roller, release the
paper by pressing the green lever
(as illustrated in the diagram).
Please take care not to tear
the paper in this context.
If part of the paper is already
located in the setting unit, it can
be pulled out in the direction
opposite to the print direction, as
illustrated in the diagram.
• Please take care not to
tear the paper in this
context.
• Caution! The setting unit
may be very hot.
DANGER OF BURNING!
• Please do not pull the
paper towards the paper
exit
Once you have ensured that both
the jammed paper and any paper
scraps have been removed, re-
install the printer unit and close the
machine and side paper feed cover.
Note
If a paper jam occurs during fax
reception, the remaining pages are
stored in the memory. Once the
paper jam has been eliminated, the
remaining pages are printed out
automatically.
147
Advertisement
Table of Contents
