Table of Contents
Advertisement
Remove transport fittings:
Before you start to use your fax machine, please remove all transport fittings.
Prepare and insert the printer unit
In order to prevent any transport damage, the high-quality printer unit of your new fax machine is supplied with
the additional protection of special packaging. Please also follow the enclosed instructions.
The printer unit consists of two separate components, namely the drum unit and the developer assembly.
Remove these two parts from their packaging and follow the following instructions.
1. Pull the release button to open
the fax machine.
2. Hold the ends of the developer
assembly, and shake the
assembly several times from
side to side. This will loosen
the toner.
• Avoid touching the metal roller.
3. Hold the developer assembly
securely in one hand, and use
your other hand to peel the
protective film off from the
toner cartridge.
• Avoid touching the protective
film, as there may be toner
residues on the film.
4. Take the drum unit and insert it
into the developer assembly as
detailed in the drawing.
• Any damage to the printer drum
will impair the image quality. You
must therefore never touch the
green drum surface or expose the
drum to direct sunlight for more
than three minutes.
5. Use the green handles to hold the
printer unit, and place the unit in
the fax machine as detailed in the
drawing.
6. Press lightly on the green
rectangles on the drum unit so
that the unit audibly clicks into
position.
The printer unit must be
removed before the machine
is transported or moved.
7. Take the fixing roller cleaner out
of its packaging and install it as
detailed in the drawings.
8. Use the ozone filter, if
necessary.
9. Close the cover of the fax
machine, which must audibly
click into place.
7
Advertisement
Table of Contents
