Chapter 6 Wireless Lan Applications; Introduction - Motorola VC70N0 Product Reference Manual

Chapter 6 Wireless LAN Applications

Introduction

Wireless Local Area Networks (WLAN) allow mobile computers to communicate wirelessly inside a facility and
send data to a host server in real time.
Before using the VC70 to operate wirelessly in a facility, the facility must be set up with the required hardware to
run the WLAN and the VC70 must be configured.
To configure the VC70, the Wireless Fusion Enterprise Mobility tool is provided. Fusion includes a set of wireless
applications used for configuring and testing the WLAN radio inside the VC70.
To setup and configure the WLAN inside the facility, refer to the documentation provided with the host server
software and access point units (APs) of the facility.
NOTE The WLAN operation in the VC70 is active by default.
IMPORTANT This section includes basic user instructions available for the Wireless Fusion Enterprise Mobility tool.
The
Wireless Applications
•
Wireless Status
•
Wireless Diagnostics
•
Find WLANs
•
Manage Profiles
•
Options
•
Log On/Off
•
Enable/Disable Radio (Fusion 2.5 and above only).
Tap the >
Programs
For your convenience, a complete Wireless Fusion Enterprise Mobility User Guide, available at the time
this guide was released, is provided with this manual
For the most updated Wireless Fusion guide, refer to the Wireless Fusion Enterprise Mobility User Guide,
p/n 72E-122495-xx at: http://supportcentral.motorola.com
menu on the task tray provides the following wireless applications:
> >
Fusion Wireless Launch
(see Attached Wireless Fusion User Guide Ver
> Product Manuals.
to display the
Wireless Applications
.
X2.00)
menu.