Sensors Configuration; Desiccant Warning - Motorola VC70N0 Product Reference Manual

3 - 30 VC70 Vehicle Computer Product Reference Guide
•
Wakeup:
•
Misc:
•
CPU Pwr:
To save battery power, set the vehicle computer to turn off after a specified number of minutes.

Sensors Configuration

Humidity and temperature sensors, located under the VC70 touch screen, are used to warn the user of high
humidity and temperature inside the VC70.
Readings from the sensors are processed to initiate humidity warning (Desiccant Warning) and over heat of the
touch panel (TouchPanel OverHeat).

Desiccant Warning

When "Check the desiccant packs. Replace if necessary" warning is shown on the screen, the desiccant bag inside
the VC70 needs to be replaced.
The Desiccant Warning applet is used to generate humidity warning.
The Desiccant Warning applet can be set to:
•
View and/or modify desiccant humidity threshold data.
•
Use up to three pre-defined modes of operation for different work environments.
Before setting the Desiccant Warning applet, enable the desiccant warning.
To Enable / Disable the desiccant warning:
From the VC70 desktop, tap
1.
Run the System Manager
2.
Tap the Desiccant Warning tab.
3.
Check / Uncheck the Enable Desiccant Warning box.
4.
To configure the Desiccant Warning applet:
From the VC70 desktop, tap
1.
Run "SensorsConfig.exe". The Config Sensors Utility opens.
2.
> Settings > Control Panel.
application.
> Programs > Windows Explorer > Windows
.