Using Voice Communication - Motorola VC70N0 Product Reference Manual

3 - 18 VC70 Vehicle Computer Product Reference Guide

Using Voice Communication

You may connect an external speaker to your vehicle computer. Use a Motorola HSN4040 15 Watt water-resistant
loudspeaker and connect it to the VC70 External Speaker connector using the adapter cable (PN 25-159552-01).
NOTE When connecting the adapter cable, the audio is automatically routed to the external speaker. If the external
speaker is not connected, you will not be able to hear any audio.
You may also connect an external PTT microphone to your vehicle computer and use it for voice communication
and voice recording using the CE built in capabilities. Connect the external microphone (HMN1089B) to the
Microphone connector.
For recording, perform the following:
Tap the >
1.
Tap the
2. Sounds
Sound Control Window
Figure 3-24
To record your voice, press the PTT button and the
3.
To stop recording, press the
4.
To listen to your recording, press the
5.
NOTE For Wavelink Speakeasy, refer to
> . The
Programs Samples
icon. The following sound control window appears.
and release the PTT button.
Chapter 11, Software
window appears.
Samples
.
.
Configuration.