Checking The Calibration Results; Check That The Crank Is Detecting No Load - Pioneer SGY-PM910H2 Installation Manual

5.3

Checking the Calibration Results

Check that the sensor has been calibrated correctly.
5.3.1

Check that the crank is detecting no load.

In the Force Preview screen of the SGX-CA500, the figures shown should be within the following range.
Tangential Force : 0 +/- 3N
Radial Force: 0 +/- 3N
If numbers outside this range are shown, it is possible that the crank moved during
the calibration. Please retry with the crank in a stable position.
19