8
Use the [←]/[→] buttons to enter the left/right balance (%)
and then press the [Confirm] button.
Be careful because correct power display will not be possible if you mix
up the left and right when setting this.
■Auto Zero Point Calibration
You can set zero point calibration to be performed automatically before the device
enters sleep mode when the crank arm is placed vertical to the ground after the
bike has been ridden for at least 20 minutes in an environment with a stable tem-
perature before stopping.
This allows you to significantly reduce the frequency of performing zero point cali-
bration before training.
1
Press the [Menu] button.
238