Pioneer SGX-CA600 User Manual page 262

Slope
ANT+ shifter
The battery states are displayed for electric powered components compatible with
SRAM eTap™ and other ANT+ shifters.
They are displayed when the information of supported items is received.
"--" is displayed for items when searching and before the data is received.
Setting item
Front Derailleur
Rear Derailleur
L Shifter
R Shifter
System Derailleur
ANT+ smart trainer
If you connect a ANT+smart trainer that supports load control, you can link the load
with training and simulation functions.
Setting item
Training Link
Simulation Llink
Load Setting
Each of the set values is sent to the ANT+smart trainer.
Shimano Di2 D-FLY
Setting item
Front Adjustment
Rear Adjustment
Set this when a CTF type ANT+power meter is
connected.
The values received from the ANT+power meter are
displayed or the set values are sent to the ANT+power
meter.
Description
Display the battery level and status of the front derailleur.
Display the battery level and status of the rear derailleur.
Display the battery level and status of the left shifter.
Display the battery level and status of the right shifter.
Display the battery level and status of the system
derailleur.
Description
Select this check box to link the target power value
during training to the load of the ANT+smart trainer.
Select this check box to link the current gradient during
course simulation to the load of the ANT+smart trainer.
Select the load type from [Power], [Grade], and [Disable].
You can send the set power value or gradient value to a
ANT+smart trainer to adjust the load manually.
Description
Display the adjustment value of the front derailleur.
Display the adjustment value of the rear derailleur.
262