Notifying When Forget To Start Logging - Pioneer SGX-CA600 User Manual

8
Press the [Menu] button.
Setting finishes.
Note
! The Auto Pause function may not work properly when using GPS speed
while using rollers or when there is no speed sensor.

■Notifying when Forget to Start Logging

You can use the Reminder function to display a message if you start a ride without
starting logging.
Set the operation interval of the Reminder function as desired.
Select from [10 sec], [30 sec], and [1 min]* for the setting.
*: Factory default setting
Note
! The Reminder function reminds you not only before logging starts but
also when you resume a ride from the logging stopped state.
! The Reminder function determines you are riding by one of the values of
speed, cadence, or power.
It may not operate depending on the GPS Speed setting, or the condi-
tions of the sensor connection or GPS reception.
1
Press the [Menu] button.
64