Pedaling Monitor; Initial Setup; Connecting - Pioneer SGX-CA600 User Manual

Pedaling Monitor

Initial Setup

This section describes how to connect a pedaling monitor, configure various set-
tings, and perform zero point calibration.

■Connecting

Connect the pedaling monitor sensors to the device.
1
Turn the crankset of the bike at least three times to start the
left and right transmitters.
Refer to the user's guide of your sensors for mounting instructions.
2
Press the [Menu] button.
3
Use the [←]/[→] buttons to select [Bike] and then press the
[Confirm] button.
219