9 Error Code (Using the SGX-CA500)
An error code is displayed if an error occurs while doing calibrations.
Code
2 Insufficient battery power
3 There is a possibility of disconnection.
6 Large disruption detected due to vibration during calibration
Description of error
Battery exchange
Please contact your dealer or service representative.
1.it is possible that the crank moved during the calibration.
Please retry with the crank in a stable position
2. Communication status is likely to be poor.
try again someplace where there is no interference from microwaves,
radio waves, or wireless equipment.
3.There is a possibility of product failure due to flooding.
Please contact your dealer or service representative.
26
Correspondence