Toro Groundsmaster
4000?D Service Manual page 227

PRELIMINARY – For Toro Distributor and Toro Company use only.
NOTE: Most of the seat suspension components can
be serviced with the seat suspension base mounted to
the frame platform. If the air spring assembly (item 6) re-
quires removal, the seat suspension base will have to be
removed from the seat platform.
Disassembly (Fig. 15)
1. Remove operator seat from seat suspension (see
Operator Seat Removal in this section).
2. If the air spring assembly (item 6) or base plate (item
37) requires removal, remove seat suspension from
seat platform (see Operator Seat Removal in this sec-
tion).
3. Remove seat suspension components as needed
using Figure 15 as a guide.
Groundsmaster 4000−D
Assembly (Fig. 15)
1. Install all removed seat suspension components us-
ing Figure 15 as a guide.
2. Install seat suspension if it was removed from seat
platform (see Operator Seat Installation in this section):
3. Install operator seat to seat suspension (see Opera-
tor Seat Installation in this section).
4. Make sure that seat electrical connectors are se-
cured to machine wire harness.
Page 7 − 19 Chassis