Programming the Unit
Changing the Unit's
Settings
You can view and change the unit's settings from CPM.
1.
Click
.
2.
Click [Unit settings].
•
The feature settings screen is displayed.
3.
Click one of the setting categories on the left side of
the screen.
•
Detailed settings are displayed on the right side
of the screen.
4.
Change the settings as required (see Page 60).
5.
Click [OK].
•
You will return to the Maintenance screen.
58
Operating Instructions for Conferencing Phone Manager
•
To close the screen without changing any
settings, click [Cancel].
Note
•
If you change a setting that requires restarting
the unit, a confirmation message is displayed.
To make the change, click [Yes] and restart the
unit.
•
The following settings require restarting the
unit.
–
Operation Mode
–
IP Network Settings
–
Signalling Protocol Settings
–
QoS Settings
–
VoIP Settings (SIP Signalling Port Number
only)
Document Version 2010/02