Problem
F and a number
appear in the
display.
F 10
F 11
F 20
F 44
F 55
Possible cause and remedy
The suction tube in the water container
– is not fitted correctly
– is not positioned vertically
^ Connect it properly and make sure it is vertical:
Blocked drain hoses
^ Descale the appliance. If the fault message appears in the
display again call the Service Department.
Communication fault
^ Switch the appliance off and then back on again after a few
minutes.
If the fault code appears in the display again call the Ser-
vice Department.
The maximum length of time for which the steam combi oven
can be operated has been exceeded and so the appliance
has switched itself off automatically for safety reasons.
^ The appliance can be used again immediately by switching
it off and on again.
Problem solving guide
143