Setting The Terminal Numbers (Irc Machine Numbers) - Master And Satellite - Sharp ER-A770 Instruction Manual

2. Setting the terminal numbers (IRC machine numbers) —
master and satellite
It is assumed that your terminal's setting for inline operations has been performed.
NOTE
• Terminal numbers must be assigned to the master and each satellite in the IRC system.
(For setting the master's terminal number, see the next paragraph.)
• If an inline network contains two or more machines with the same terminal number, IRC
communications will not be achieved correctly. Each terminal number must be unique.
• The terminal number should be within the range from 1 to 254.
• If the terminal number "000" is programmed for a machine, it is put in the OFF LINE mode and
cannot take part in IRC communications.
28
1.
Enter the PGM2 mode.
2.
Select "INLINE SETTING" and press the [ENTER]
key.
3.
Enter a terminal number (0 - 254) and press the
[ENTER] key.
(For programming for BMA MACHINE No. and
SYSTEM RETRY, see pages
4.
Repeat steps 1 to 3 for all machines in the IRC
system.
31 - 32.)