5
Error Recovery
1. Data clear operation
With the data clear operation, you can clear various item memories when necessary.
This operation should be done only when the master or system breaks down.
(1) Data clearing of the electronic journal data — master and satellite
You can clear the electronic journal data in the event of some trouble.
This function is available at the master and satellites.
(2) Data clearing of the T-LOG buffer — master and satellite
You can clear the T-LOG buffer in the event of some trouble. This function is available at
the master and satellites.
Clearing procedure
After selecting "DATA CLEAR" from the PGM2 MODE menu with the same procedure as
steps 1 and 2 in "(1) Data clearing of the electronic journal data," select "T-LOG."
54
Clearing procedure
1.
Select "PGM2 MODE" from the mode selection menu
and press the [ENTER] key.
2.
Select "DATA CLEAR" and press the [ENTER] key.
3.
Select "E.JOURNAL" and press the [ENTER] key.