Specifying Whether To Enable Or Disable The Function For Data Transmission To The Remote Printer - Master And Satellite; Specifying The Format Of Remote Printing - Master And Satellite - Sharp ER-A770 Instruction Manual

(4) Specifying whether to enable or disable the function for data
transmission to the remote printer — master and satellite
If a remote printer is disconnected from the IRC system or any other problem occurs in it,
you can disable your machine to stop data transmission to the remote printer. This prevents
any error message from appearing on the machine display each time an entry to be
transmitted to that printer is made.
(5) Specifying the format of remote printing — master and satellite
With the following procedure, you can specify what items to be printed on the remote
printer.
40
Move the cursor to the "TRANSMISSION" line and select
"DISABLE" or "ENABLE" with the [ • ] key (toggle key) or
display the choices by pressing the [SBTL] key.
1.
Move the cursor to the following printing format items
and select PRINT or SKIP with the [ • ] key (toggle
key) or display them by pressing the [SBTL] key.
Printing when quantity is one: PRINT/SKIP
PLU/department code:
Unit price
Amount:
The default setting for these items is SKIP.
2.
Press the [CA/AT] key to finish the programming for
the remote printer. The CHIT FORMAT window will
open.
(For programming for CHIT FORMAT, see the next
paragraph.)
PRINT/SKIP
PRINT/SKIP
PRINT/SKIP