Creating/Updating The Master List - Master; Creating The Master List (Subwindow Program) - Sharp ER-A770 Instruction Manual

3. Creating/updating the master list — master

(1) Creating the master list (subwindow program)

This may only be performed on the pre-designated master.
1.
Enter the PGM2 mode.
2.
Select "INLINE SETTING" and press the [ENTER]
key.
3.
Enter a terminal number (0 - 254) for the master and
then carry out the programming for other INLINE
SETTING items and press the [ENTER] key. The
subwindow for the creation of the master list will open.
(For programming for BMA MACHINE No. and
SYSTEM RETRY, see pages
4.
Enter the terminal number (1 - 254) for each machine
in the IRC system (for the master and satellites) and
press the [ENTER] key. The subwindow for machine
number entry will open.
5.
Enter the machine number (1 - 999999) that
corresponds to the previously entered terminal
number and press the [ENTER] key.
6.
Repeat steps 4 to 5 for all machines in the IRC
system. Press the [CA/AT] key to complete the master
list.
7.
Proceed to "7. Downloading the contents of the IRC
programming to satellites", see page
preset.
31 - 32.)
35 — Inline
29