Oil System - Craftsman 108.27807 Operator's Manual

Oil System

CAUTION
Use only SAE 15W/40 OIL. Never substitute or mix oil brands. Serious engine
damage and voiding of warranty can result.
The oil fill is located on the right side of the engine.
To check the oil:
1. Set machine on a level surface.
2. Start the engine and let it idle for 20-30 seconds.
3. Stop the engine, remove the dipstick (1) and wipe dry with a clean cloth.
4. Put dipstick into the oil fill hole, remove it, and read the oil level.
5. If the oil level is between the full and add marks (2). Add oil as indicated by the
level on the dipstick. Do not overfill.
4-Wheel Drive System (4WD)
WARNING
Extremely heavy steering feel is a symptom of malfunction of the front gear case
(differential). Loss of control could result, even in 2-Wheel Drive (2WD) position. If
you experience any of these steering symptoms, contact 1-800-643-7332 for an
authorized service dealer. Asymmetrical heavy steering is a symptom of
malfunction of the inner or outer CV joints on one side of the unit. Loss of control
could result, even in 2WD position. If you experience any of these steering
symptoms, contact 1-800-643-7332 for an authorized service dealer.
38