Craftsman 108.27807 Operator's Manual page 56

Item
Code
Brake pad wear
D
Rear Gear case Oil
•
Front Gear case Oil
•
(Only for 4WD)
Engine Cylinder
Head and Cylinder
Base Fasteners
General Lubrication
•
Engine
•
Oil-Level/Change
Oil Filter
•
Engine breather
hose
Carburetor Float
Bowl
Throttle Cable
D
Coolant strength
Shift linkage
Drive belt
D
Steering
•
Rear Axle
•
Front Suspension
•
Rear Suspension
•
Spark Plug
Ignition Timing
D
Fuel System
D
Fuel Filter
D
Hours When
10 hrs Monthly
100 hrs Monthly
100 hrs Monthly
25 hrs 3 months
50 hrs 3 months
30 hrs 3 months
50 hrs 6 months
100 hrs 6 months
50 hrs 6 months
50 hrs 6 months
100 hrs 6 months
50 hrs 6 months
50 hrs 6 months
50 hrs 6 months
50 hrs 6 months
50 hrs 6 months
50 hrs 6 months
100 hrs 12 months
100 hrs 12 months
100 hrs 12 months
100 hrs 12 months
56
Remarks
Visually Inspect
periodically
Check monthly and
change annually
Check monthly and
change annually
Inspect (re-torque
required at first service
only)
*Lubricate all fittings,
pivots, cables, etc.
Check Level Daily;
Break in Service at 1
month. Change oil more
often in cold weather
use.
Inspect-clean
Inspect
Drain bowl periodically
and prior to storage
Pre-ride inspection item.
Inspect –adjust,
lubricate, replace if
necessary.
Inspect strength
seasonally
Inspect, adjust
Inspect, replace if
necessary
Inspect daily, lubricate
Inspect bearings,
lubricate
Inspect-lubricate, tighten
fasteners
Inspect, tighten
fasteners
Inspect-replace if
necessary
Inspect and adjust as
needed
Check for leaks at tank
cap, lines, fuel valve,
filter, and carburetor.
Replace lines annually.
Replace annually