Base Station Interface - Toshiba IP4100 Installation Manual

BASE STATION INTERFACE

Table 1-4 Summary: Basic System Configuration
General System Settings
Change the name that appears at the top of the
configuration screens, specify a configuration server, and
enable SIP and system logs.
Change the default user name and password.
Change the PSTN tones and emergency dialing format.
Configure Basic Network Settings
Specify time server address and DST settings.
SIP Server Settings
Program the SIP server(s).
The SIP server is the IPedge or Strata CIX system.
Servers
Program extensions on each IPedge or Strata CIX system.
Register a handset to each extension.
BASE STATION
INTERFACE
1-10
Step
Each base station has a built-in HTTP server that controls the
configuration interface. To open the web page:
1. Open a web browser window and type the IP address of the base
station in the address bar. If you don't know the base station's IP
address, try one of the following:
A. Use the IP Search function on the handsets. On any handset,
press Menu, then enter *47* (*IP*). After several seconds, the
handset displays the MAC and IP addresses of all base stations
within range. Find the MAC address of the base station in the list
to determine its IP address. To exit IP Search, press End twice.
B. If your network supports Dynamic DNS, then type
ipdect<{MAC}> in the address bar of your browser (just insert
the MAC address of the base station in place of {MAC}).
Powering on the Handset
Screens Used
Management Required
Web Security Recommended
Country Required for countries
other than the US and
Canada
Network Required
Time Settings Required (If you are
updating Server
information, you must
reboot the base station
for changes to take
effect.)
Network Required (You must
reboot the base station
for changes to take
effect).
Extensions Required
Extensions Required
IP4100 Install Sept., 2013
Notes