Sanyo VSP-8000 Instruction Manual page 29

TIMELAPSE VCR OPERATION
Call-up command operation list
The in the table tells you the corresponding section below for reference.
Call-up command
ALARM SCAN Plays back first 5 seconds of alarm recordings
ALARM SEARCH Searches for specified alarm recording and still image
•
AUDIO/SEARCH
•
•
CLOCK ADJUST Sets minutes and seconds of clock to 00
COUNT CODE Displays the tape counter
COUNTER MEMORY Stores counter value of scene you want to see
COUNTER RESET Sets counter of scene you want to see to 00:00:00
HEAD TIME Calculates video head cumulative time of use (hours)
MENU RESET Returns menu screen settings to initial values
POWER OFF Turns off timelapse VCR
POWER ON Turns on timelapse VCR
POWER TIMER Calculates cumulative time of power on
SECURITY LOCK OFF Deactivates security lock
SECURITY LOCK ON Activates security lock
TIMER ON/OFF Sets/clears recording set by timer
T/D SEARCH-1 Searches for recording of specified day and hour, and still image
T/D SEARCH-2 Searches for recording of specified day, hour and minute, and still image
T/D SEARCH-3 Searches for recording of specified day, hour, minute and second, and still image
SHARPNESS Adjusts picture sharpness
ON SCREEN Turns screen display on and off
•
Note: If the connected device does not have command functions, then "No OPE." will appear in the menu screen.
•
In group operation, the commands with the
Operations
A:
Plays back first 5 seconds of alarm
recordings
1.
With the tape stopped, press the
FUNCTION button.
2.
Press the + (or – ) button to select
"ALARM SCAN".
3.
Press the ENTER button.
V R : 0 0 1 A . S C A N
F F / R E W ?
4.
Press the FF button.
V R : 0 0 1 A . S C A N
F F
B:
Searches for specified alarm recording
and still image
1.
With the tape stopped, press the
FUNCTION button.
2.
Press the + (or – ) button to select
"ALARM SEARCH".
3.
Press the ENTER button.
4.
Using the numeric keypad, specify the
alarm number.
Ex.: 3 → [0] [3]
V R : 0 0 1 A . S E A R C H
0 3 F F / R E W ?
5.
Press the FF button.
V R : 0 0 1 A . S E A R C H
0 3 F F
Turns on/off audio for playback during 12/24-hour mode
Each time this command is executed while the tape is stopped, the mode switches
from Alarm Search mode to Alarm Scan mode to Time/Date Search mode to Cancel
Search mode
Cancels the menu screen while the menu screen is displayed and returns the display
to the monitor screen
C:
Sets minutes and seconds of clock to 00
Ex.: Set clock to 14:00
Works over the range from 13:30:00 to
14:29:59.
1.
Press the + (or – ) button to select
"CLOCK ADJUST".
2.
Press the ENTER button.
V R : 0 0 1
3.
Press the ENTER button again.
V R : 0 0 1
D:
Sets/clears recording set by timer
Setting the timer recording in the menu
screen.
(Refer to the Timelapse VCR instruction
manual.)
1.
Press the + (or – ) button to select
"TIMER ON/OFF".
2.
Press the ENTER button and return the
menu screen to its normal screen.
Recording is programmed.
3.
Press the + (or – ) button to select
"TIMER ON/OFF".
4.
Press the ENTER button again.
Recording program is cancelled.
V R : 0 0 1
Operation
cannot be performed.
C L K A D J .
P R E S S : [ E N T E R ]
C L K A D J .
T . O N / O F F
28
Menu screen
( A)
( B)
VR:001 AUD/SEAR
( C)
VR:001 COUNT.
@@@@@@@@-1:23:45
VR:001 C.MEMORY
VR:001 C.RESET
VR:001 HEAD T.
@@@@@@@@00529H
VR:001 MENU RST
VR:001 PW.OFF
VR:001 PW.ON
VR:001 POWER T.
@@@@@@@@00529H
VR:001 S.L.OFF
VR:001 S.L.ON
( D)
( E)
E)
( E) VR:001 T/D S.3
( F) VR:001 SHARPNES
SHARP:+
VR:001 ON SCRN
E:
Searches for recording of specified day
and hour, and still image
1.
With the tape stopped, press the
FUNCTION button.
2.
Press the + (or – ) button to select "T/D
SEARCH-1" and "T/D SEARCH-2" or
"T/D SEARCH-3".
3.
Press the ENTER button.
4.
Using the numeric keypad, specify the
day and hour to search for.
Ex.: 3:00 p.m. (15:00) on the 6th → [0]
[6] [1] [5]
V R : 0 0 1 T / D S . 1
0 6 1 5 F F / R E W ?
5.
Press the FF button.
V R : 0 0 1 T / D S . 1
0 6 1 5 F F
F:
Adjusts picture sharpness
1.
Press the + (or – ) button to select
"SHARPNES".
2.
Press the ENTER button.
V R : 0 0 1 S H A R P N E S
S H A R P : + S O F T : -
3.
Adjust sharpness with the + (or – )
button. Press the + button for a sharper
picture or the – button for a softer picture.
V R : 0 0 1 S H A R P
V R : 0 0 1 S O F T
SOFT:-