[B] Operation Using The Call-Up Commands - Sanyo VSP-8000 Instruction Manual

CAMERA OPERATION

[B] Operation using the call-up commands

Use the procedure outlined below to operate the dome cameras.
S A N Y O C o n t r o l l e r
1 5 : 3 0 : 3 0
Operating procedure
1. Press the INDIVIDUAL button.
2. Press the MODE button to change the displayed device to
"CM".
3. Enter the address with the numeric keypad.
4. Press the ENTER button to check the address.
•
The operating status of the camera appears in the menu
screen.
5. Press the FUNCTION button to bring up the commands.
•
The command name is displayed flashing.
•
For an explanation of the camera call-up commands, refer
to the Call-up command operation list on page 33.
6. Press the + (or – ) button to select the desired command.
7. Press the ENTER button to execute the command.
To abort the operation, press the STOP button.
CLEAR
INDIVIDUAL
1 Device display
M X : - -
-
2 Device selection
C M : - -
-
MODE
3 Address entry
1 2 3
C M : - - 1
P T Z C A M 0 1
4 5 6
7 8 9
0
4 Address check
C M : 0 0 1
ENTER
E L S : o n B L C : o f f
5 Call-up command
C M : 0 0 1
FUNCTION
L - L P H A S E
6 Command selection
C M : 0 0 1
– +
P R E S E T M E M O R Y
7 Command execution
C M : 0 0 1 N o . - -
ENTER
P R E S E T M E M O R Y
32
M X : - -
-
V R : - -
-
C M : - -
-
D R : - -
-
Device title ( P13)
CLEAR
Operating status
CLEAR
Call-up command
-
Multiplexer
Timelapse VCR
Camera
Digital video
recorder