Adjusting The Image Position Of Copier Output (Book Mode) - Canon iR105 Service Manual

CHAPTER 6 TROUBLESHOOTING

2.1.2 Adjusting the Image Position of Copier Output (book mode)

Make these adjustments only after you have adjusted the image position of
printer output.
1) Adjusting the Image Leading Edge Non-Image Width
Place the NA3 Test Chart on the copyboard glass, and make a copy to check the image
leading edge non-image width:
Standard: 4 +1.5 mm, -1.0 mm
Adjustment: COPIER>ADJUST>ADJ-XY>ADJ-X
• A higher value increases the margin.
• A lower value decreases the margin.
2) Adjusting the Image Front Non-Image Width
Place the NA3 Test Chart on the copyboard glass, and make a copy to check the image
front non-image width.
Standard: 2.5 ±1.5 mm
Adjustment: COPIER>ADJUST>ADJ-XY>ADJ-Y
• A higher value increases the margin.
• A lower value decreases the margin.
6-14
COPYRIGHT© 2001 CANON INC.
4+1.5mm,-1.0mm
F06-201-09
2.5 ±1.5mm
F06-201-10
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001