Counter Summary
The Counter Summary page allows you to view all ports accumulated, unicasts and nonunicasts received and transmitted, and errors received and
transmitted.
Click the Refresh button to refresh the Counter Summary page.
Save Configuration
If you make any changes to the system through the Web interface, you must save the changes in the Save Configuration page.
The following options are available:
Save Configuration to NVRAM — Saves changes to the system configuration.
l
Restore Factory Defaults — Resets the system configuration to its original default settings.
l
Restore Factory Defaults will reboot the switch.
NOTE:
Network IP settings like IP address, gateway address, and network mask are not restored by this command.