The graphics in this section may differ slightly from the graphics on your computer.
With web-based management, you can configure the PowerConnect 3048 Fast Ethernet Managed Switch and monitor the system using a web browser.
Most web pages for the switch feature the following buttons:
Reload — Displays the current values for the system related to the web page that is open.
l
Apply — Makes changes to the system and refreshes the page. These changes do not persist past the current session.
l
NOTICE:
For changes to persist beyond the current session, you must save the new configuration from the Save Configuration page.
Add — Adds new entries to the system and refreshes the page.
l
Remove — Removes selected entries from the system and refreshes the page.
l
Web Pages
When you connect to the switch with a Web browser, a login screen is displayed (if password protection has been enabled). The user name is always root.
Enter the password to access the switch's management mode. Once the password is entered correctly, the front page will appear.
NOTE:
The default password is switch.
The following menus are available from the Web interface: