Address Aging - Dell PowerConnect 3048 User Manual

Address Aging

In the Address Aging page, you can specify how long an address stays available to the switch if it is not configured as static.
NOTE: The default value is set to 300 seconds (5 minutes).
The following option is available:
Aging Time — The time before an address is purged from the system. You can change this value to any number between 10 and 1,000,000 seconds.
l
To save any changes you make in this page, click Apply. To reset these fields to their current value, click Reload.
Static Multicast Group Settings
The Static multicast settings manage multicast traffic. Each multicast address can be assigned ports that will participate in that multicast group. Ports that are
added to a multicast group will forward all multicast packets from the specified multicast address to the other ports in that group.