General Info - Dell PowerConnect 3048 User Manual

From the initial welcome screen, you must enter a password to proceed, if password protection is enabled. If password protection is disabled, the Main Menu
is displayed and you immediately have access to the switch management interface. By default, password protection is disabled. If enabled, the default
password is switch.
Main Menu
The main menu displays all the submenus and pages that are available.
The following menu items are available:
System Manager
l
Port Manager
l
Address Manager
l
Spanning Tree
l
VLAN and CoS Setup
l
Port Trunking
l
Port Mirroring
l
SNMP Management
l
Multimedia Support
l
Statistics
l
Save Configuration
l
To log out of the user interface, press <Ctrl><d> at any time during your Telnet session. This returns you to the login screen.
System Manager
The system manager contains all system options to configure the switch to your network as well as general information. It includes the following menus:
General Info — View general system information and perform general administration.
l
IP Settings — View or edit IP parameters.
l
Security Admin — To select user authentication, enable or disable password protection, or filter by IP address.
l
Firmware Upgrade — Trivial File Transfer Protocol (TFTP) the latest firmware for upgrade.
l
Reset — Reboot the switch.
l

General Info

The General Info screen contains the following information:
System Description
l
MAC Address
l
It also includes the following editable fields:
System Name
l
System Contact
l
System Location
l