Removing The Primary Exhaust Fan (Fm6) - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
5. Removing the Primary Exhaust
Fan (FM6)
• Removing the Filter
1) Remove the two screws [1], and remove the
filter cover [2] of the rear cover 1.
Figure 4-108C
2) Remove the ozone filter [3].
[3]
Figure 4-109C
4-6
COPYRIGHT © 2001 CANON INC.
[2]
[1]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
• Removing the Primary Exhaust Fan
1) Remove the rear cover 1.
2) Remove the screw [1], and open the DC
controller PCB.
3) Disconnect the connector [2], and remove the
two screws [3]; then, draw out the fan
assembly [4].
[3]
[4]
[1]
Figure 4-110C
4) Remove the three screws [5], and remove the
fan [6].
Figure 4-111C
[2]
[3]
[5]
[6]