Sharp SL-5600 Operation Manual page 153

Transferring data between the same models (SL-5600)
Receiving data in Manual mode
1.
Receiving Unit
On the Settings Home screen, tap the "Beam Receive" application icon.
The Beam Receive screen appears.
Tap the Manual radio button and then tap "Start" to enter receiving mode.
2.
Sending Unit
Point the IR ports of both units at each other.
3.
Sending Unit
To transfer application entries:
Open the Detail screen you want to send.
Then, tap the "Data" menu and then tap "Send by beam...".
To send a file (such as text file, image file):
Display the Files Home screen and move the focus to the file
you want to send.
Then, tap the "File" menu and then tap "Send by beam...".
4.
Receiving Unit
The Beam Receive screen turns to the infrared receive screen within a few
seconds. During data reception, the "Receiving..." message appears.
When the unit is finished receiving data, tap the "Add" button on the Infrared
receive screen. When a file is received, select the destination if memory card is
inserted.
Information about
the received entry
Add button
Adds the received data to
the application (or specified
folder) of the receiving unit.
When the unit is finished
receiving data, the "Add"
button becomes effective.
The received data will be added to the specified application or folder on the
receiving unit.
If the "Add" button is not tapped, the received data will not be added.
If you tap "Cancel", the registration is canceled.
Settings 147
Tap to cancel registration
of the received data.