Sharp SL-5600 Operation Manual page 178

172 Network Settings (Network)
5.
Enter the necessary item.
If necessary, tap the "Advanced Setting..." button to enter more settings.
The Advanced setting screen appears.
Init-commands field
Speed drop-down list
button
Hardware flow control
checkbox
Wait time slider
6.
Tap
The screen returns to the first screen.
Enter if you add a special command.
Tap and select the communication speed.
Choices are:9600, 19200, 38400, 57600, and 115200.
The default setting (115200) is recommended unless you
need to change it.
Check to perform hardware flow control. (default: ON)
Leave it checked unless you need to change it.
Change the time-out for connection by moving the slider,
if necessary.
to save the advanced settings.
Init commands field
Speed drop-down list
button
Hardware flow control
checkbox
Wait time slider