Sharp SL-5600 Operation Manual page 154

148 Settings
5.
Receiving Unit
Tap the "Beam Receive" application icon displayed on the taskbar to display the
Beam Receive screen, and tap the "Stop" button to cancel receive mode.
Note:
• Be sure to tap the "Stop" button in step 5 as the battery will continue to drain
in receive mode.
• To cancel sending, tap "Cancel" on the sending screen.
• The approximate time of file transfer is 15 seconds per 100 KB file.
Receiving data in Automatic receive mode
The Automatic receive mode notifies you of data transfer, even if you are in another
application.
1.
Tap the Automatic radio button on the Beam Receive screen.
2.
Perform steps 2 to 4 above of "Receiving data in Manual mode" to start data
transfer.
Note:
• To cancel sending, tap "Cancel" on the sending screen.
• The approximate time of file transfer is 15 seconds per 100 KB file.
Notes on data transfer between models SL-5500 and
SL-5600
Some entry items are different or do not exist in the same applications for SL-5500
and SL-5600. One model cannot receive items transmitted from the other model that
does not have.
For example, when a completed task entry of the Todo List application is sent from
the SL-5500 to the SL-5600, the "Completed Date" item is replaced by the date of
transmission (as this item does not exist on the SL-5500).