Sharp SL-5600 Operation Manual page 196

190 Network Settings (Network)
4.
For the Wireless LAN settings, tap the "WEP" tab to set the encryption key.
The encryption key (WEP) is used for data security for wireless communications.
Enter the same settings as the access point.
WEP Key field
Key Type drop-down list
button
WEP key
WEP Key Type radio
buttons
WEP key field
Detail Setting button
Authentication drop-down
list button
Selects the encryption key length from the following:
Disabled, 40bit(64bit), 104bit(128bit).
Selects the encryption key format, Text or Hex and
enter the characters as follows:
Text: 5 characters for 40 bit (64 bit), or 13 characters
for 104 bit (128 bit).
Hex: 10 characters for 40 bit (64 bit), or 26 characters
for 104 bit (128 bit)
The character number necessary for the WEP key is
displayed on the left of the radio buttons.
Enter the encryption key set in the Key Type section.
If the Key type is set to "Disabled", this field is not used.
Tap to set several WEP keys according to access point
requirements.
Selects the way of the authentication of the access
point: Open System or Shared Key.
Key Type drop-down
list button
WEP Key Type radio
buttons
Authentication drop-
down list button