Ram Clear - Toshiba e-STUDIO165 Service Manual

2.2.11

RAM clear

There are two methods to perform RAM clear: turning the power ON while pressing the specified keys,
and clearing the partial memory by selecting items to be cleared from the menu.
Follow the procedure below to clear the RAM by selecting items to be cleared from the menu,
Refer to P. 2-105 "[A] MEMORY CLEAR"
< RAM clear by turning the power ON >
<Key used in operation>
Specified Keys
Warming up
READY(Standby)
* : Continue pushing the key until "Please wait" message is displayed.
Moreover, do not turn off the power supply.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Power ON *
Fig. 2-31
2 - 113
06/06
<Display messages>
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
2