Download Print this page

Toshiba e-STUDIO165 Service Manual page 24

Hide thumbs Also See for e-STUDIO165:

Advertisement

Error code
Classification
E32
Paper transport jam
E33
E35
E36
E40
Cover open jam
E41
E42
E44
E51
Paper transport jam
(ADU section)
E71
ADF jam
E72
E73
E74
E86
E87
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
Contents
PFP upper drawer transport jam (Paper not reach-
ing the PFU feed sensor): The paper fed from the
PFP upper drawer does not reach the PFU feed
sensor after it has passed the PFP upper drawer
feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the registration sensor): The paper fed from the
PFP lower drawer does not reach the registration
sensor after it has passed the PFP lower drawer
feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the PFU feed sensor): The paper fed from the
PFP lower drawer does not reach the PFU feed
sensor after it has passed the PFP lower drawer
feed sensor.
PFP lower drawer transport jam (Paper not reach-
ing the PFP upper drawer feed sensor): The paper
fed from the PFP lower drawer does not reach the
PFP upper drawer feed sensor after it has passed
the PFP lower drawer feed sensor.
Transfer cover open jam: The transfer cover has
opened during printing.
Front cover open jam: The front cover has opened
during printing.
PFP cover open jam: The PFP cover has opened
during printing.
PFU cover open jam: The PFU cover has opened
during printing.
Jam not reaching the ADU sensor: The paper does
not reach the ADU sensor after it is switchbacked in
the exit section.
Jam not reaching the original registration sensor:
The original fed from the original feeding tray does
not reach the original registration sensor.
Jam not reaching the read sensor: The original
does not reach the read sensor after it has passed
the registration sensor.
Stop jam at the exit sensor: The trailing edge of the
original does not pass the exit sensor after its lead-
ing edge has reached this sensor.
Stop jam at the reverse sensor: The trailing edge of
the original does not pass the reversal sensor after
its leading edge has reached this sensor. (RADF)
ADF jam access cover open: The ADF jam access
cover has opened during ADF operation.
ADF open jam: ADF has opened during ADF opera-
tion.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 2
Troubleshooting
P. 5-4
P. 5-3
P. 5-4
P. 5-5
P. 5-12
P. 5-12
P. 5-13
P. 5-13
P. 5-6
P. 5-14
P. 5-14
P. 5-15
P. 5-15
P. 5-16
P. 5-16

Hide quick links:

Advertisement

loading

This manual is also suitable for:

E-studio167E-studio205E-studio207E-studio237