(8)
Perform the initialization of the updating data.
•
Turn ON the power while [0] button and [8] button are pressed simultaneously.
•
Key in "947", and then press the [START] button.
•
Press the [START] button.
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to confirm that the
data was overwritten properly.
<Updating System ROM>
08-900: System ROM version
08-921: FROM internal program version
08-922: Function table data version
08-923: Language data version
<Updating Controller ROM>
08-1952: Controller ROM version
e-STUDIO165/167/205/207/237
FIRMWARE UPDATING
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 6
06/09