Toshiba e-STUDIO165 Service Manual page 270

(16) Set the setting value.
Set the setting values of the following codes according to the list printed out in advance.
(If the adjustment values could not be printed out because of the SRAM board damage or any
other reason, enter the values on the list output at the last maintenance. If there is no list, enter
the default values.)
08-252 (Current value of PM counter Display)
08-361_0 (Upper Fuser roller bushing (Present number of output pages))
08-361_1 (Upper Fuser roller bushing (Recommended number of output pages
for replacement))
08-361_3 (Upper Fuser roller bushing (Present driving counts))
08-361_4 (Upper Fuser roller bushing (Recommended driving counts to be replaced))
08-361_6 (Upper Fuser roller bushing (Present output pages for control))
08-361_7 (Upper Fuser roller bushing (Present driving counts for control))
08-1150_0 (Photoconductive drum (Present number of output pages))
08-1150_1 (Photoconductive drum (Recommended number of output pages for replacement))
08-1150_3 (Photoconductive drum (Present driving counts))
08-1150_4 (Photoconductive drum (Recommended driving counts to be replaced))
08-1150_6 (Photoconductive drum (Present output pages for control))
08-1150_7 (Photoconductive drum (Present driving counts for control))
08-1158_0 (Drum cleaning blade (Present number of output pages))
08-1158_1 (Drum cleaning blade (Recommended number of output pages for replacement))
08-1158_3 (Drum cleaning blade (Present driving counts))
08-1158_4 (Drum cleaning blade (Recommended driving counts to be replaced))
08-1158_6 (Drum cleaning blade (Present output pages for control))
08-1158_7 (Drum cleaning blade (Present driving counts for control))
08-1172_0 (Drum separation finger (Present number of output pages))
08-1172_1 (Drum separation finger (Recommended number of output pages for replacement))
08-1172_3 (Drum separation finger (Present driving counts))
08-1172_4 (Drum separation finger (Recommended driving counts to be replaced))
08-1172_6 (Drum separation finger (Present output pages for control))
08-1172_7 (Drum separation finger (Present driving counts for control))
08-1174_0 (Main charger grid (Present number of output pages))
08-1174_1 (Main charger grid (Recommended number of output pages for replacement))
08-1174_3 (Main charger grid (Present driving counts))
08-1174_4 (Main charger grid (Recommended driving counts to be replaced))
08-1174_6 (Main charger grid (Present output pages for control))
08-1174_7 (Main charger grid (Present driving counts for control))
08-1182_0 (Needle electrode (Present number of output pages))
08-1182_1 (Needle electrode (Recommended number of output pages for replacement))
08-1182_3 (Needle electrode (Present driving counts))
08-1182_4 (Needle electrode (Recommended driving counts to be replaced))
08-1182_6 (Needle electrode (Present output pages for control))
08-1182_7 (Needle electrode (Present driving counts for control))
08-1198_0 (Ozone filter (Present number of output pages))
08-1198_1 (Ozone filter (Recommended number of output pages for replacement))
08-1198_3 (Ozone filter (Present driving counts))
08-1198_4 (Ozone filter (Recommended driving counts to be replaced))
08-1198_6 (Ozone filter (Present output pages for control))
08-1198_7 (Ozone filter (Present driving counts for control))
08-1200_0 (Developer material (Present number of output pages))
08-1200_1 (Developer material (Recommended number of output pages for replacement))
08-1200_3 (Developer material (Present driving counts))
08-1200_4 (Developer material (Recommended driving counts to be replaced))
08-1200_6 (Developer material (Present output pages for control))
08-1200_7 (Developer material (Present driving counts for control))
e-STUDIO165/167/205/207/237
TROUBLESHOOTING
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 52
07/09