Wan; Ppp Over Ethernet Interface - Motorola 2200 Administrator's Handbook

Link:

WAN

WAN
When you click the
WAN interface of your Motorola Netopia® Gateway.
WAN IP Interfaces: Your IP interfaces are listed.

PPP over Ethernet interface

PPP over Ethernet
Click the
The WAN IP Interface page appears.
Enable Interface: You can disable the interface by unchecking the checkbox. However, doing so will dis-
able all ability for your LAN users to connect to the WAN using the Gateway.
Address Mapping (NAT): Specifies whether you want the Gateway to use network address translation
(NAT) when communicating with remote routers. NAT lets you conceal details of your network from remote
routers. By default, address mapping is enabled.
link, the WAN IP configuration page appears. This page varies depending on the
link to configure it.
67