Default Server; Configure A Default Server; Typical Network Diagram - Motorola 2200 Administrator's Handbook

Link:

Default Server

This feature allows you to:
•
Direct your Gateway to forward all externally initiated IP traffic (TCP and UDP protocols only) to a default
host on the LAN.
Enable it for certain situations:
– Where you cannot anticipate what port number or packet protocol an in-bound application might
use. For example, some network games select arbitrary port numbers when a connection is
opened.
– When you want all unsolicited traffic to go to a specific LAN host.
•
Configure for IP Passthrough.
Configure a Default Server.
designated LAN station. With NAT "On" in the Gateway, these packets normally would be discarded.
For instance, this could be application traffic where you don't know (in advance) the port or protocol that
will be used. Some game applications fit this profile.
Use the following steps to setup a NAT default server to receive this information:
Select the Configure
1.
From the pull-down menu, select Default-Server.
2.
The NAT Server IP Address field appears.
Determine the IP address of the LAN computer you have chosen to receive the unex-
3.
pected or unknown traffic.
Enter this address in the NAT Server IP Address field.
Click the Submit
4.
Click the Alert button.
5.
Click the Save and Restart
6.

Typical Network Diagram.

This feature allows you to direct unsolicited or non-specific traffic to a
toolbar button, then Advanced, then the
button.
link to confirm.
A typical network using the NAT Default Server looks like this:
Default Server link.
89