Toshiba e-STUDIO230L Service Handbook page 257

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
1686 Wireless Wireless LAN supplicant
LAN EAP user name
1689 Wireless Wireless LAN supplicant
LAN Authentication interval
1690 Wireless Wireless LAN supplicant
LAN Holding interval
1691 Wireless Wireless LAN supplicant
LAN EAPOL-Start
Number of times of packet
retry
1692 Wireless Wireless LAN supplicant
LAN Session resume
1693 Wireless Wireless LAN supplicant
LAN MAC Frame size
1696 Wireless Wireless LAN supplicant
LAN Device file setting for
obtaining random number
1697 Wireless Wireless LAN supplicant
LAN CRL directory designation
1699 Wireless Wireless LAN supplicant
LAN EAP authentication type
1700 Wireless Wireless LAN supplicant
LAN CN name
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Default
Func- <Accept-
Items
tion
ALL
ALL
65535>
ALL
65535>
ALL
65535>
ALL
ALL
<1-1398>
ALL
urandom
ALL
ALL
ALL
2 - 221
07/11
RAM Contents
able
value>
- - This should be the user
name when the PEAP
is used.
30 - This should be the time-
<30- out interval between
EAP responses.
30: 30 seconds
60 - The EAP authentica-
<60- tion will start after hav-
ing been waited in this
period when an EAP
failure was received.
60: 60 seconds
3 - When an EAPOL-Start
<1- packet has been sent
and the request ID can-
not be received, this
EAPOL-Start packet will
be re-sent for the num-
ber of times set in this
code.
3: 3 times
2 - This setting is whether
<1-2> the pre-master key
should be updated or
not upon a TLS re-
negotiation.
1: Session is resumed
2: Session is not
resumed
1398 - This is a MAC frame
size used in the wire-
less LAN connection.
The data is fragmented
into this size.
1398: 1398 bytes
/dev/ - This should be the
device file name which
can obtain a seed to ini-
tialize the WEP PRNG
for xsupplicant.
(Maximum 255 letters)
- - This should be the path
name of the directory in
full where the CRL file
is located.
(Maximum 255 letters)
1 - This setting is for the
<1-3> EAP authentication
type which xsupplicant
can authenticate.
1: EAP-TLS 2: PEAP
3: EAP-TLS and PEAP
- - This should be an
authentication server
name (basically a
domain name in full).
(Maximum 255 letters)
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
12
2
12
12
12
12
12
12
12
12
12